How To Get Air Out Of Hayward Pool Pump

Why is there Air in the Pool Pump?

Having air in your Hayward pool pump can be frustrating and can affect the performance of your pool. The presence of air in the pump can lead to poor circulation, reduced water flow, and even damage to the pump itself. There are several reasons why air may be getting into your pool pump system.

1. Air Leakage

One common reason for air in the pool pump is air leakage. This can occur if there are any loose or faulty connections in the plumbing system. Check all the fittings, valves, and pipes for any signs of leaks. Tighten any loose connections or replace faulty parts to prevent air from entering the system.

2. Priming Issues

Another reason for air in the pool pump is improper priming. Priming is the process of removing air from the system and filling it with water. If the pool pump is not properly primed, it can result in air being trapped in the system. Make sure to follow the manufacturer’s instructions on how to prime your specific Hayward pool pump model.

3. Low Water Level

A low water level in the pool can also cause air to enter the pump. If the water level is below the skimmer, the pump may start sucking in air instead of water. Regularly check and maintain the water level in your pool to prevent this issue.

4. Clogged Skimmer or Pump Basket

A clogged skimmer or pump basket can restrict the flow of water and cause air to enter the pump. Make sure to regularly clean and remove any debris from the skimmer and pump basket to ensure proper water flow and prevent air from entering the system.

How to Remove Air from Hayward Pool Pump

Now that we understand the possible causes of air in the pool pump, let’s discuss how to remove it and restore proper water circulation.

1. Check for Leaks

Start by inspecting all the connections, valves, and pipes for any signs of leaks. Use a soapy water solution and apply it to the suspected areas. If you see any bubbles forming, it indicates a leak. Tighten the connections or replace any faulty parts to eliminate the air leakage.

2. Prime the Pump

If the pump is not properly primed, it can result in air being trapped in the system. Follow the manufacturer’s instructions on how to prime your specific Hayward pool pump model. This usually involves turning off the pump, removing the pump lid, filling the pump with water, and resealing the lid tightly. Restart the pump and check if the air is expelled.

3. Increase the Water Level

If the water level in your pool is too low, the pump may suck in air instead of water. Increase the water level to ensure that it is above the skimmer. This will prevent air from entering the pump and improve water flow.

4. Clean the Skimmer and Pump Basket

A clogged skimmer or pump basket can restrict water flow and cause air to enter the pump. Regularly clean and remove any debris from the skimmer and pump basket. This will enhance water circulation and prevent air from getting into the system.

5. Bleed the Air from the System

If the above steps do not fully remove the air from the pump, you may need to bleed the air manually. Locate the air release valve on the pool filter or pump and open it slightly to release any trapped air. Close the valve once water starts coming out consistently without any air bubbles.

Maintaining Air-Free Pool Pump

Preventing air from entering the pool pump is crucial for its optimal performance. Here are some tips to maintain an air-free pool pump:

1. Regularly Check for Leaks

Inspect all the connections, valves, and pipes for any signs of leaks. Fix any leaks promptly to prevent air from entering the system.

2. Properly Prime the Pump

Ensure that you follow the manufacturer’s instructions on how to prime your specific Hayward pool pump model. Proper priming will help remove any air in the system and ensure efficient water circulation.

3. Maintain the Water Level

Regularly check and maintain the water level in your pool. Keep it above the skimmer to prevent air from entering the pump.

4. Clean the Skimmer and Pump Basket

Regularly clean and remove any debris from the skimmer and pump basket. This will prevent clogs and ensure proper water flow.

5. Schedule Regular Maintenance

Have a professional inspect and maintain your pool pump regularly. They can identify any potential issues and perform necessary repairs or replacements to keep your pump air-free.

By following these steps and maintaining your Hayward pool pump properly, you can ensure optimal water circulation and prevent air from affecting its performance. Enjoy a clean and well-maintained pool throughout the year!

You May Also Like